Explore this set
MITHRIL + AURA set automatic flushing, simpler installation
The MITHRIL smart toilet with an AURA concealed cistern frame and conventional flush plate. The set combines a pre-routed cleansing-water supply with flushing after use, from the remote or with the closing foot gesture.
Front and rear wash
Warm water, adjustable flow.
Warm air drying
Adjustable drying temperature.
Heated seat
Set the temperature to your preference.
Three elements in one set
MITHRIL YA61
Cleansing, drying, a heated seat and foot-sensor control of the seat and lid.
AURA
Flushing cistern and a factory-routed hose for the cleansing system.
AURA WHITE
A conventional push button. Manual flushing also works without electricity.
Less work routing the water supply
The frame has factory-separated supplies for flushing and cleansing water. An additional hose runs through a dedicated channel, so the installer does not need to add a tee fitting or route a separate pipe behind the enclosure to the shower toilet.
Flushing after use, by remote or foot sensor
The dedicated AURA concealed cistern system enables automatic flushing about 5 seconds after you stand up, even without using the cleansing functions. The remote offers half and full flush. When both the seat and lid are raised, the next foot gesture closes them and triggers a flush.
Quiet operation and durable components
The flushing system is designed for discreet, reliable performance. A sturdy frame provides stability, while high-quality internal components support the long service life of the concealed installation.
Easy servicing and spare parts
Removing the flush plate gives you access to key components without disturbing the bathroom finishes. We provide long-term access to spare parts, so individual components can be replaced when needed instead of the entire frame.
The wall button works without electricity. The toilet’s cleansing and automatic functions require power.
Automation for everyday convenience.
MITHRIL combines convenient controls with care for the water system. The included AURA frame enables automatic flushing and flush control from the remote and foot sensor.
Additional options with AURA
The included AURA frame enables automatic flushing and remote flush control. The wall button also allows manual flushing without electricity.
Open with a foot gesture
Move your foot towards the sensor under the right side of the bowl. The first gesture opens the lid; the next raises the seat.
Effective descaling
A descaling programme and a separate solution reservoir help reduce limescale, keep the water system clear and extend the service life of its components.
Swirl flushing
A swirling flow rinses the inside of the bowl. The rimless design makes it easier to reach the surface when cleaning.
Close and flush with one gesture
With both the seat and lid raised, move your foot towards the sensor to close them. In this AURA set, the same gesture also flushes the toilet.
Explore every function
Choose a group and expand its functions.
Cleansing and dryingChoose a mode and adjust the settings.
Front and rear wash
Two independent water streams: a focused stream for rear cleansing and a wider, gentler stream for feminine front cleansing.
Oscillating wash
In oscillating mode, the nozzle moves back and forth to cleanse a wider area.
Nozzle position and flow
Adjust the nozzle position and water flow to suit your preferences.
Warm water on demand
On-demand heating provides warm water throughout cleansing. Adjust the temperature to your preference.
Warm air drying
Start drying after cleansing and select the air temperature.
Hygiene and careFeatures that help keep the appliance clean.
Effective descaling
A descaling programme and a separate solution reservoir help reduce limescale, keep the water system clear and extend the service life of its components.
Swirl flushing
A swirling flow rinses the inside of the bowl. The rimless design makes it easier to reach the surface when cleaning.
Automatic nozzle rinsing
The nozzle is rinsed with water before and after cleansing.
Removable nozzle tip
The removable tip provides convenient access for regular nozzle cleaning.
Water inlet filter
The filter traps mechanical impurities. Regular cleaning helps maintain proper water flow.
Automatic flushing with AURA
With the included AURA frame, flushing starts about 5 seconds after you stand up, even if you have not used the washing functions.
Front and rear cleansing
The extending nozzle directs water to the selected area. Adjust its position and the water pressure using the remote.
Water flow inside the bowl
The cutaway shows the flow of water during flushing and the construction of the toilet bowl.
Comfort and controlsConvenience for everyday use.
Heated seat
Set the seat temperature to suit your preferences.
Automatic seat and lid
Open the lid and seat with a foot gesture or control them from the remote. They do not close automatically after a time delay.
Foot control
Successive gestures open the lid, raise the seat and close both. When connected to an AURA frame, the third gesture also flushes the toilet.
Remote and side knob
Adjust the settings with the remote. Use the side dial to start front washing, rear washing or drying and adjust selected settings.
Bowl lighting
Gentle lighting makes the toilet easier to use at night.
ECO and quiet modes
ECO reduces seat heating while the toilet is idle. You can also turn off the audible signals.
Seat sensor
The sensor detects when the seat is occupied and enables the cleansing functions during use.
Seat and lid control
The first foot gesture opens the lid; the second raises the seat. You can also operate both from the remote.
Your settings, always within reach.
Choose a cleansing mode and adjust the settings. The remote diagram shows the button functions.
Swipe sideways to see all labels.
Cleansing
Front, rear and oscillating wash. The STOP button ends the current function.
Adjustment
Nozzle position, water flow and water, drying and seat temperatures.
Seat and lid
Remote buttons control opening and closing.
Flushing with AURA
The HALF FLUSH and FULL FLUSH buttons trigger flushing once the included AURA frame is connected.
A short press and a long press may activate different functions. See the user manual for detailed operating instructions.
Plan the set installation.
The AURA frame and flush plate are included. Plan the frame’s water supply, waste connection and toilet power supply before finishing the wall.
AURA frame included
Toilet fixing centres: 180 mm. The drawing below shows frame dimensions and mounting points.
Cleansing-water supply
Use the additional hose factory-routed through the frame. Connect it to the cleansing system as specified in the manual.
220–240 V power supply
Prepare an electrical cable with proper earthing, following the installation manual.
Pneumatic connection to AURA
The automatic-flush controller is factory-fitted inside the toilet. Connect the pneumatic tube from the mechanism behind the flush plate to the prepared inlet underneath the toilet’s upper housing. No additional electrical cable is needed between the toilet and frame. The toilet and its automatic functions still require electricity.
How does flushing work?
Once the set is connected, flushing works after you stand up, from the remote and with the gesture that closes the raised seat and lid. These functions require electricity. The wall button also allows manual flushing during a power cut or with the toilet switched off.
Preparing the connections
The installation manual shows the toilet’s water, waste and power connections. The frame drawing is included in the dimensions section.
View installation manualDimensions and technical details
Toilet, frame and flush plate details, with drawings to help you plan the installation.
Construction and dimensions
- Model
- MITHRIL / YA61
- Installation
- Wall-hung
- Overall size (L × max. W)
- 595 × 392 mm
- Toilet weight
- 38 kg
- Fixing centres
- 180 mm
- Outlet
- Horizontal
- Bowl
- Rimless sanitary ceramic
- Seat and lid
- ABS; soft closing
- Finish
- White
Power supply
- Power supply
- 220–240 V, 50/60 Hz
- Rated power
- 1055 W
- Water heater power
- 1500 W
- Protection rating
- IPX4
Water and flushing
- Water supply pressure
- 0.08–0.8 MPa (static)
- Water heating
- Instantaneous
- Standard flushing
- Swirl; operated by cistern flush plate
- Automatic flushing in this set
- Yes — after connecting the included AURA frame with the pneumatic tube
AURA frame — construction and installation
- Brand / series
- Major&Maker / AURA
- Frame and flush plate model
- G3008PJ-W
- Application
- Wall-hung WC; drywall enclosure
- Frame width
- 497 mm
- Frame height
- 1238 mm
- Minimum installation depth, excluding wall finish
- 90 mm
- Installation depth range
- 90–110 mm
- Wall finish thickness in front of frame
- 10–60 mm
- Leg adjustment
- 0–120 mm
- Toilet fixing centres
- 180 / 230 mm
- Included flush plate colour
- white
- Service access
- By removing the flush plate
Frame — water supply and flushing
- Cistern water inlet
- G 1/2″ (DN15)
- Cleansing-water supply
- Factory-separated supply; additional hose in frame channel
- Toilet outlet connections
- Ø90 mm
- Water pressure — frame
- Dynamic min. 0.02 MPa; static max. 0.8 MPa
- Cistern water temperature
- 2–45°C
- Manual flushing
- Conventional wall button; also works without power
- Automatic flushing in this set
- Yes, once correctly connected; requires power
Installation depth covers the frame and its mounting; allow separately for the wall finish. The pressure values above apply to the cistern. The toilet’s own requirements are listed in its specifications.
Included installation components
- Water inlet with valve; additional cleansing-water hose.
- Frame fixings: brackets, screws and wall plugs.
- Two fixing studs / bolts for the ceramic toilet.
- Connection sleeves, flush pipe and outlet components.
- Protective covers and caps, plus the service-opening housing.
- A AURA flush plate in the selected colour.
- Cistern cover, plastic brackets, pipe connector and clamp.
- Flushing mechanism; automatic-flush connection used according to the toilet’s features.
Technical drawings
Toilet, seat and open-lid dimensions
Swipe the drawing sideways to read all dimensions.
Fixing centres and connection positions
Swipe the drawing sideways to read all dimensions.
Frame AURA — dimensions and mounting points
Swipe the drawing sideways to read all dimensions.
Useful before installation. Essential afterwards.
MITHRIL toilet — user manual
Operation, care and technical data.
PDF · PL / EN · Open PDFMITHRIL toilet — installation manual
Connection preparation, drawings and installation.
PDF · PL / EN · Open PDFMITHRIL remote control manual
Buttons, adjustments and additional remote settings.
PDF · PL / EN · Open PDFAURA frame installation manual
Installing the frame, cistern and flush plate.
PDF · PL / EN · Open PDFHave a question? Talk to our team.
In Poland since 2018
We develop our range of smart toilets and bidet seats.
We help you choose an appliance for your bathroom.
24-month warranty
See the product documentation for warranty terms and how to make a claim.
Our own service centre in Warsaw
Warranty and post-warranty support.
Our own stock of parts for service repairs.
